Used Key Renew for BMW G-Series and F-Series Vehicles! Now in BN020!

We are happy to introduce a new functionality to the recently launched BN020 license for spare key programming for BMW F-Series and G-Series vehicles with BDC02 modules:

Second-hand original key renewal

All owners of the BN020 license can now access this new feature!

This is valid for original keys, which have been already used. They can be easily renewed by opening the key shell and working with the PCB on bench with ABProg and the ZN046 key renewal adapter.
After the renewal procedure, the key can be easily programmed using Protag and working with the BDC02 module on bench.

Used key reset and programming is done as follows:

1. Remove the BDC02 module from the car
2. Perform the key programming procedure with the BDC02 the module using BN020, the Distribution Box Set, and ZN095 adapter on bench
3. Open the key shell and connect to the PCB with ABProg and ZN046 on bench
4. Reset the key via the ABProg menu in the Abrites software
5. Program the renewed key using Protag
6. Learn the renewed key in the car by putting it on the ring aerial while turning ignition on for about 30 seconds

Required hardware for key renew:

• AVDI
• ABProg
• Key Renewal Adapter (ZN046)
   

Required hardware for adding the renewed key:

1. AVDI
2. Distribution Box Set (ZN151)
3. Adapter for connection to the BDC02 module (ZN095)
4. Protag key and transponder programmer (ZN003)

Full YouTube tutorial is coming soon! A short video guide is now available!