2023-2025 Toyota Dashboards Added for Calibration in the TN020 License!

In the latest update of the TN020 license for Dashboard calibration for Toyota and Lexus vehicles with RH850 by direct CAN-Bus connection (with Denso Smart System), we have:

Added support for new Toyota models 2023-2025 for mileage calibration

The procedure is done via internal CAN-Bus connection in a minute and requires no additional software, only the TN020 license and active annual subscription!

How-to:

1. Connect to the Smart System using the CB031 and CB012 cables (detailed info is available in the user manual)
2. Connect to the OBD port of the vehicle using AVDI and the CB106 cable
3. Open the Abrites diagnostics for Toyota vehicles and go to Dash Calibration
4. Select the “Write” button and enter the new odometer value, press “Write”
5. Wait for a few seconds

Calibration is done!

What models are supported?

The dashboards in the new Toyota models, equipped with RH850 processors, include the following:

• Toyota Yaris Cross
• Toyota Corolla GR
• Toyota Corolla Cross HV

The clusters are fully digital and look like this:

In Corolla GR it may look like this:

What do you need?

Required hardware tools:

• AVDI
• CB012 Direct CAN-BUS/LIN-BUS Connection Cable Set
• CB031 Еxtension Cable for Direct Connecting to Toyota/Lexus Smart System with B9/BA

Required software:

• TN020 Dashboard Calibration for Toyota and Lexus Vehicles with RH850 by Direct CAN Bus Connection (Denso)
• AMS Active annual subscription