We are excited to announce the latest
updates to the Abrites vehicle diagnostic software: online version 35.3, diagnostics for VAG vehicles version 42.3, FBS4 Manager version 2.11.
The new links coming very soon to your email contain major software innovations, unmatched by anyone on the market!
What to expect?
Abrites FBS4 Manager version 2.11
Personalization revolution:
– Setting to virgin state and personalization of VGS4NAG2 transmission control units without opening or cutting the module! FIRST and ONLY solution in the world! (MN039 license)
– Personalization of ALL DSM modules, as well as virgin or brand-new MRD1/MRG1 and MED41 (MED17.7.7) ECUs when NO PREVIOUSLY SAVED PERSONALIZATION DATA FROM THE ORIGINAL MODULE IS AVAILABLE! (MN034 license)
Effortless error elimination:
– Erase “Emergency P”(P179A77) error in DSM module and “Start Enable not issued” (P051300) error in VGS-FDCT module (MN032 license)
Cluster customization:
– Region change (temperature data from F to C in dashboard, and tyre pressure from bar to psi, and vice versa) for Mercedes-Benz vehicles with IC177M/IC223 dashboards (MN041 license)
Service functions:
– Service interval reset for Mercedes-Benz vehicles with IC223 dashboards (MN038 license)
Abrites Diagnostics for VAG Vehicles Online Version 35.3
ECU adaptation and dash calibration elevated:
– JCI dashboard calibration for VAG vehicles (dashboards without Immo) (VN023 license)
– Much faster procedure for reading all VDO dashboards in order to use VN021, VN022, and VN024 licenses
Abrites Diagnostics for VAG vehicles version 42.3
ECU adaptation procedure improvement:
– Find MAC of Immo Slave – the MAC address is required for adapting ECUs when the power class is different (VN002 license required)
– Sync MAC address of all Immo slaves (VN002 license required)
Finding and syncing the MAC address is necessary for adaptation of ECUs when the power class is different! So, this update is crucial for better, easier and faster ECU adaptation.
Adaptation of ECU is done in following steps:
Read CS -> find MAC using the CS -> Authenticate -> Reflash with FRF to adjust the Power Class -> adjust CS
Abrites Diagnostics for McLaren Vehicles Online Version 35.3
Deep dive:
The Abrites diagnostics for McLaren vehicles is part of the essential AVDI software, available with active annual subscription.
With your AVDI you can access dealer-level diagnostic capabilities, allowing you a deep look into all modules in the vehicle, details on trouble codes (DTCs), and real-time data display.
The list of supported vehicles include McLaren MP4-12C, McLaren 650S, McLaren 720S, McLaren GT, and many more, including all their vatiations like Spyder and GTR. Full list of supported vehicles can be found in the diagnostics page.
License-based functionalities are coming very soon!
Abrites Diagnostics for BMW and MINI Vehicles Online Version 35.3
Module adaptation and coding:
– BDC2 modules adaptation and reset mileage to 0 km (new BN022 license) – BDC2 replacement is done on bench using the Distribution Box Set (ZN151) and BDC2 Bench Connection Cable for BMW Vehicles (ZN095)
– Detailed and convenient coding options (BN012 license required)
Abrites Diagnostics for FCA Vehicles Online Version 35.3
Unlock more for FCA vehicles:
– Key programming by dump of Fujitsu processors for FIAT Ducato/Peugeot Boxer 2022+ and derivatives (FN025 license)
– All Keys Lost key programming by dump for FIAT 500E (2013-2018) (FN022 license)
– Service Maintenance Reset for Maserati Levante (included in the essential AVDI software, annual subscription required)
Abrites Diagnostics for Peugeot and Citroen Vehicles Online Version 35.3
Key programming development:
– PIN code reading via an emulator which can be used for emergency start (ZN094)
– Key programming
All models with HT-AES keys (typically 2016+) are supported.
Remember:
Download and install the latest links for your AVDI interface and keep your annual subscription active to get access to the latest diagnostic updates and enjoy the full capacity of the new licenses you shop!
